Wait for the power light to stop flashing before turning off the product. If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it.
Solution 1: PowerCycling Printer
- Disconnect the printer's power adapter from the power socket. Disconnecting Power cord.
- Press and hold the “Power” button for at least 30 seconds.
- Plug the power back in and press the power button.
- Try to print something and check to see if the issue persists.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.
RED—A red signal light means STOP. FLASHING RED—A flashing red signal light means exactly the same as a stop sign: STOP! After stopping, proceed when safe and observe the right-of-way rules. YELLOW—A yellow signal light warns you that the red signal is about to appear.
Why is my printer flashing orange?
- Perform Power Reset. Remove the Cartridges from the printer.
- Check the Ink Cartridge for Fault. If you haven't changed the Ink Cartridge for a long time now, it may be the right time to have a look at them and check them for quality issues.
- Uninstall and Reinstall Printer Driver.
Fill the ink tanks as described on the Start Here sheet. Turn on the product and press the ink button for 3 seconds until the power light starts flashing and ink charging begins. Wait until the power light stops flashing and charging is complete after about 20 minutes.
- Power Off Printer.
- Press and hold both Power and Paper Feed buttons for 15 seconds.
- Release both buttons. Power button indicator light should be blinking yellow green while Paper Feed button is steady Orange (forever).
- Now press and hold the paper feed button for 3 seconds then release. Both lights should be steady.
How do I restore my product's default settings?
- Press the home button, if necessary.
- Select Setup.
- Scroll down and select System Administration. Enter the administrator password, if necessary.
- Scroll down and select Restore Default Settings. You see this screen:
- Select one of these options:
- Select Yes to reset the selected settings.
Turn off the product, make sure no paper is jammed, then turn it back on again. If the error continues, contact Epson for support. A printer's ink pad is nearing the end of its service life. The ink pad is near the end of its service life, contact Epson for support.
Using the reset feature is a common need to clear a jam, clear a queue or to work through a different set of troubleshooting issues. Not all models have a reset button, but they all have a process to reset the printer.
Use printer buttons to resetFor more general errors, users may reset their printer by pressing and holding the Stop, Maintenance, and Power buttons all at the same time. Other Epson models, such as the RX620, require you press and hold the Stop, B&W, and Power buttons simultaneously.
Steps to reset Waste Ink Pad Counter on Epson Printers
- Extract the archived files using WinRar.
- Open the .exe file in order to run the utility and select the Epson printer type.
- After selecting the printer model, click OK.
- In the Maintenance section, select Waste ink pad counter and press OK.
How to Replace an Ink Pad on an Epson
- Spread plastic or newspapers over a table and place your unplugged printer on it.
- Remove the viewing panel.
- Find the ink waste tubes.
- Remove the old pad.
- Replace the pad.
- Reset the counter and get rid of the error message.
Ink and paper lights blinking alternately means that your internal “waste ink pads” are full and need resetting/cleaning out. Check your Epson Status Monitor (on PC) for any error messages - if it says “service required” or “… end of service life” then it's the waste pads.
Selecting Wireless Network Settings From the Control Panel
- Press the home button, if necessary.
- Select Setup.
- Select Network Settings.
- Select Wi-Fi Setup.
- Select Wi-Fi Setup Wizard.
- Select the name of your wireless network or enter the name manually.
- Enter your wireless password (or network name and then password) using the displayed keypad.
Epson Adjustment Program is the solution for all your problem related to Epson Printers. This tool helps you to reset the waste ink pad counter and reset flashlights error condition on your Epson L360, L365, L310, L220, L210, and L120 printers.
I hope you'll do it.
- Download the above Epson L365 resetter program first.
- Turn off your antivirus protection for a while.
- Unzip the Epson L365 Resetter Tool file into a folder.
- Run the Adjprog.exe application from the extracted folder.
- In this adjustment program, click on select button.
3.How to fix Epson L300 waste ink counter overflow?
- How to fix Epson L300 waste ink counter overflow? Step 1: Download WIC Reset Tool and install the WIC Reset.
- Step 1: Download WIC Reset Tool and install the WIC Reset.
- Step 2: Buy the WIC RESET KEY.
- Step 3: Reset your printer with WIC Reset and WIC Reset Key.
How do I reset the ink levels for my product?
- Press the button, if necessary.
- Press the up or down arrow button to select Setup > Maintenance > Reset Ink Levels.
- Press one of the Start buttons, then press the OK button.
- Press the OK button again.
- Press the right or left arrow button to highlight the ink tank you refilled, and press the OK button to select it.
To reset the L355 ink pad counter, click in the Main pad counter check box to select it and then click on the Initialization button. Thus would start the process of resetting the ink pad counter to zero. The process should be instant and you should immediately see a dialog box popping up.
Reset your Epson L380 printer by WIC Reset Tool
- Step 1: Free Download WIC Reset Utility Tools. You can download WIC Reset Utility in [Download Page] and also by direct link below:
- Step 2: Purchasing (Reset Key)
- Step 3: How you can reset your Epson L380 computer printer with Epson adjustment program.
Simply remove the cartridges and spray some Windex in the offending holes where the ink flows into the printhead itself. You can leave this for several hours or even overnight untill all dried ink inside the printhead is dissolved.
First, make sure the printer is on and has paper in the tray. Next, check to make sure the printer cable is properly connected to both the computer and the printer. If you still can't print, check to make sure the printer is not set to offline mode. Go to Start, Printers and Faxes.
If you have an Epson printer and your prints are coming out faint, incomplete, or streaked with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It's unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.
Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them.
If your printer cartridge is low on ink, it will create issues with the print quality. For some users replacing the Cyan ink cartridge has helped them resolve the red printing issue. So, open the printer toner and check if any of the cartridges are running low on ink.
Checking the Nozzles Using the Product Control Panel
- Load a few sheets of plain paper in the product.
- Press the up or down arrow button, select Setup, and press the OK button.
- Select Maintenance and press the OK button.
- Select Print Head Nozzle Check and press the OK button.
- Press one of the Start buttons to begin printing.
Incorrect Colors
- Make sure the paper type setting matches the paper you loaded.
- Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software.
- Run a nozzle check to see if any of the print head nozzles are clogged.
- The ink levels may be low and you may need to refill the ink.
Built-in Android printing with the Epson Print Enabler
- Download the Epson Print Enabler software from the Google Play store.
- Select the options drop down and then print.
- Select a nearby printer.
- Choose your print options and select print.
- The print job is then printed at your chosen printer.
