How much boost can a stock sr20det handle?

From everything I've read the stock bottom end of the SR20 will handle around 20-23 psi as long as your make sure your fuel delivery system and intake temp is in check. I, however, wouldn't count on it lasting too long at that pressure. 15 psi is a safe boost level that will keep your car running for a long time.

Correspondingly, how much power can a stock sr20det handle?

around 400-410whp

Also Know, how much does an sr20det weight? 338 lbs

Then, how much power does a stock sr20 make?

The stock turbo will be safe to 13-15 psi. After that, the turbo is past its efficiency range, and power increases will fall off and are not worth the risk of turbo damage. The stock engine should produce 250-260 RWHP at safe boost using stock turbo. Upgrading turbo, fuel and rest of need parts will yield 300-375.

Are sr20s reliable?

Very very very reliable motor they can go 700,000 miles easily with oil changes and maintenance.. You can get 500hp out of an sr20 all stock just an upgraded turbo but the rods are the week point.. i recommend 400-430 bhp if your going stock and just stock only a turbo upgrade will get you there.

How much HP does a sr20de have?

SR20DE

The Specs
Valve diameters:	Intake: 34 mm (1.34 in), Exhaust: 30 mm (1.18 in)
Dimensions:	685 mm (27.0 in) x 610 mm (24 in) x 615 mm (24.2 in)
Power:	145 hp (147 PS; 108 kW) at 6400 rpm (SAE net)
Maximum torque:	132 lb⋅ft (179 N⋅m) at 4800 rpm (SAE net)

Can you turbo sr20de?

Yes you can turbo an SR20DE. You don't need new pistons, you don't need a turbo timer. What you do need is a turbo and manifold off an SR20DET, otherwise an aftermarket SS one as they are so cheap no.

How heavy is a vq35de?

310 lbs

Is the ca18det a good engine?

The CA18DET has shown that it offers some decent tuning potential out of the box however when put under the stress of drifting the well documented issues with big end bearings wearing out and bricking the engine make it a less then perfect drifting powerplant.

How many Litres of oil does a sr20det take?

2nd: Engine oil for the SR20DET is 3.7L total (including filter) or 3.5L without filter (from the Nissan shop manual). 3.2/3.4 is for the SR20DE.

What kind of oil does a sr20det take?

Registered. 10W-30 Valvoline Synthetic The SR20's should have 5w-30 , anything thicker has been known to plug up the oil tubes . BUT if you run the engine hard and dont drive short distances alot and at least rev it to redline once and a while then a thicker oil will be fine

How heavy is a ka24de?

Nissan KA24 engine specs

Manufacturer	Aguascalientes Plant Yokohama Plant
Redline	6,000 (KA24E) 6,500 (KA24E) 6,100 (KA24DE) 6,400 (KA24DE) 6,900 (KA24DE)
HP per liter	56.1 58.6 59.9 62.8 64.9
Fuel type	Gasoline
Weight, kg (lbs)	167 (370)

How heavy is a rb25det?

Nissan RB25 engine specs

Manufacturer	Yokohama Plant
Redline	–
HP per liter	72.1 76.1 80.1 94.1 98.1 100.1 112.1 112.1
Fuel type	Gasoline
Weight, kg (lbs)	230 (507) – RB25DE

How much does a vq35 weigh?

300 pounds

How much does a 300zx engine weight?

The first version has two throttle bodies facing the front of the vehicle. This engine version was used on Nissan 300ZX and Fairlady Z.

Engine Specifications
Engine code	VG30DE
Weight	220 kg (485 lbs)

How much does an ls1 weigh?

about 460 lbs.