Follow these steps to reset this light:
- Turn the ignition to (II) - do not start the engine.
- Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
- Press and hold the SEL/RESET button for more than 10 seconds.
What is B Service for Acura? Acura “B” service covers the routine tasks you'll need to perform to keep your Acura running smoothly. These jobs include an oil and filter change, brake service, and a multi-point inspection performed by an Acura-certified mechanic.
A: Acura does not recommend the use of synthetic oils in models that do not require them as your Acura was designed and engineered based on the oil recommended in your owner's manual. The use of synthetic oil will not extend the oil change interval.
Many Acura models do not hold their value well, but some do. On average, you can expect a 2017 Acura to keep 75% of its original value. The Acura TLX is one model that retains its value well.
A B12 service is, "B" = Replace engine oil/filter, inspect brakes/tie rod ends/steering gear box/suspension/driveshaft boots/brake hoses and lines/all fluids/exhaust system/fuel lines and connections. "1" = Rotate tires. "2" = Replace air cleaner element/replace dust and pollen filter/inspect drive belt.
The annual repair costs for an Acura are well under the manufacturer average. RepairPal indicates that Acuras cost approximately $501 per year, with that amount including scheduled maintenance and unscheduled repairs. The cost is compared with an annual average of $652 across all models.
Acura "B" Service Pricing
| 2019 | ILX | MDX |
|---|
| B1 | $144.95 | $144.95 |
| B2 | $264.95 | $264.95 |
| B3 | $269.95 | $837.12 |
| B4 | Valve Adjust + Plugs (recommend 105K) |
Maintenance/Service Due Soon. The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.
Code a123 in a Honda Civic is a service reminder to replace the oil, rotate tires, replace air cleaner element, and replace the transmission and transfer fluid. Code A123 in a Honda Civic is a service reminder to replace the oil, rotate tires, replace air cleaner element, and replace transmission and transfer fluid.
"You can easily delete the messages.. You'll need to evoke the diagnostic screen first, get in your car, turn the nav on, and hold down the "GUIDE", "MENU", and "CANCEL" buttons for about 5 seconds. The factory calibration screen will come up. Then click on XM module, and you'll see the option to erase those messages.
There you have it, your ultimate guide to what the Honda B1 service message means. It's a safety reminder that you need an oil change, an oil filter replacement, and tire rotation. Don't ignore this alert, as it can put your engine in serious risk of damage.
Press the Select/Reset button and hold it for 10 seconds until the oil life indicator and maintenance code start flashing. Keep holding the button until the oil life indicator resets to 100% and the Honda B1 service light disappears.
Acura A1 service refers to an Acura service code that informs you when service is due on your vehicle and what services are required. An Acura A1 service code, specifically, indicates that your Acura RDX or Acura MDX is due for an oil change and tire rotation.
There is always a main item anytime Honda Maintenance Minder indicates your vehicle needs servicing. The code “A1,” for instance, means you need to replace your vehicle's oil and to rotate your tires, ensure appropriate tire pressure, or have your tires replaced.
A1 service is a comprehensive maintenance action that targets oil and tires to ensure peak vehicle performance. The "A" stands for the oil and filter change and the "1" stands for tire rotation. The A1 service code means to replace the engine oil and rotate tires, check tire pressure, and inspect tire condition.
How to Reset the Codes for an Acura TL After a Dead Battery
- Find the reset code cards supplied in the TL's original paperwork to get the five-digit radio reset code and the four-digit navigation system reset code (if the vehicle has a navigation system).
- Turn the key to the "On" position without starting the TL to power the stereo and navigation systems.
Hold the gas pedal all the way to the floor. Wait for five seconds while holding down the gas pedal. Then, turn the key back to the off position and release the gas pedal. Wait a couple minutes for the ECU to completely reset.
To reset the maintenence light:
- With the car off, hold down the "Select" & "Reset" trip odometer buttons simultaneously.
- While holding them down, turn the ignition to the "On" position.
- Keep holding them down until the light goes out/stops blinking (approx 10 seconds)
- Release both buttons.
To reset the 2004 acura tl maintenance light, turn the ignition to (ii)-do not start the engine. Click the sel / reset button on the steering wheel repeatedly before the oil life of the engine is seen. Click and hold the sel button for more than 10 seconds.
(Only for Older Acura Cars With Turn-Key Ignitions): Turn the key to the “On” position, but don't start the car. Then, hold the TPMS light reset button, wait for the tire pressure light to blink three times, and then release it. After you start the car next, wait 20 minutes for the sensor to refresh itself.
